Items offered for sale are published on behalf of the individual sellers. Whilst published details are believed to be accurate, it is the responsibility of all potential buyers to satisfy themselves that the goods offered meet their requirements. The Club disclaims all responsibility for transactions between sellers and buyers.
______________________________________
Posted: 28 October 2024
Moonbeam
Large Gaff Rigged Yacht by Metcalfe Mouldings
Length Overall: 1300 mm
Beam: 280 mm
Waterline: 1000 mm
Draught: 250 mm
Mast Height: 1350 mm
Height Overall: 1650 mm
Complete with:
Professionally made sails
HITEC Sail winch
Rudder Servo
All assembly drawings
Mast collapsible for transport
£450 or Near Offer
Contact Eric Baker - 0161 366 5750.
_________________________________________________
Posted: 02 June 2024
Maggie M
Part Built Model Slipway Kit
This kit was started several years ago but, for various reasons, now looks unlikely to get completed by its original builder. The hull is complete, with all running gear and electrical equipment fitted. It has been float tested on power and ballasted. It is offered with:
Batteries, motor, coupling, ESC, fused power supply panel, rudder, rudder servo and prop shaft fitted, but without radio receiver.
Kort Nozzle and brass 4 blade Kort propeller fitted.
Custom made brass Becker Rudder fitted.
Fully ballasted with about 4 kg of lead sheet to correct water line.
Remainder of Model Slipway kit parts, drawings and full building instructions.
Available for inspection in Timperley.
£250
Contact Geoff Garside
geoff@geoffgarside.com
0161 980 8054
_________________________________________________
Posted: 26 May 2024
Updated: 03 July 2024
Workshop Tools
Roy Cragg, an elder statesman of the Club, has had to give up modelling for health reasons, and has generously donated some of his workshop tools to be sold in aid of Club funds.
All Items Now Sold
Clarke Drill Press and Vice
Fox Band Saw
DeWalt Band Saw
Minicraft Drill Press, Power Supply
and Three Minicraft Power Drills
_________________________________________________
Posted: 11 April 2024
El Marka
This museum quality model was built in the mid 1920s, and is a replica of the full sized ship launched in Liverpool in 1920.
.
It is now fully radio controlled, with one servo on the foremast yards and a second servo for the main and mizzen mast yards. The yards can be raised and lowered by the mast halyards.
The hull is constructed of brass strips with soldered lap joints. It is ballasted with 40 lbs of lead and is foam filled for additional buoyancy - it will not sink.
All radio equipment is included.
Length 5 feet six inches.
£400 or Near Offer
Contact Roy Hilton: 07415 712 314 or 01625 612 241
EMail: karenhilton85@gmail.com
_________________________________________________
Posted: 04 April 2024
Magnificent Cabin Cruiser
This magnificent Cabin Cruiser was built by Brian Renshaw, who was a Club member about 10 to 15 years ago. Brian has recently died and the boat is being sold by his niece, Sarah Bamford. It is available for viewing in Droylsden.
Length = 36 inches
Beam = 13 inches
Fitted with Radio gear, but no batteries.
Now Sold
_________________________________________________
Posted: 13 October 2023
Alan Breese Boats
These two tugs are from the collection of Alan Breese, late Commodore of the Club, and are being sold by the Club on behalf of Jenny Breese.
They are both built to a high standard, but may need some TLC, having been in store for a few years.
Yorkshireman
Now Sold
______________________________
Smit Polen
Now Sold
Contact Chris Galloway by phone on 07794 931 563 or by Email at rcgallo32@gmail.com.
_________________________________________________
Posted: 24 July 2023
Two Sailing Boats
These two boats are from the collection of a late member of the Club, and are
being sold by his son.
Each is complete with radio gear.
£120 Each
Contact Allan Wild - 0741 544 3530
_________________________________________________
Posted: 16 July 2023
Steam Launch - Dampfpinnase
34" x 8.5" Wooden Hull
Maccsteam 3.5 " Horizontal Boiler & 2 " Gas Tank
Cheddar Puffin Style Steam Engine
Original Manufacturer's Certificates and Current Steam Certificate
£550 o.n.o
Contact Terry Miles 07831 426 113
_________________________________________________
Posted: 20 February 2023
Prinz Eugen
This magnificent semi-scratch model of the Prinz Eugen by Roy Cragg took over two years to build and cost in excess of £1000. It is constructed on a Fleetscale hull.
The Prinz Eugen was one of five Hipper Class Cruisers built for the German Navy.
The model is 5 feet 5 inches long with a 7 inch beam. It was built as a static display model, but is suitable for conversion to a fully radio controlled working model.
Included in the sale are Roy's set of construction drawings, books on the Prinz Eugen and the small plastic kit model used during construction as a reference.
Offers Over £500
For more details, and to arrange viewing, contact Roy Cragg on 0161 487 2032.
The model is located in Hazel Grove.
______________________________________________
Posted: 12 October 2022
Robbe Comtesse
Supplied with all servos and Planet Rx.
Has auxiliary motor powered from Rx Battery and RC.
Location: Cheadle Hulme - Inspection welcome
£210
Contact Peter Dunkley at peter-dunkley@virginmedia.com or on 0161 485 3750.
_________________________________________________
Posted: 04 October 2022
River Marshall
The Club has been offered a model of a River Tug Boat, free of charge to a good home.
Roger Quick, who made the offer says:
The model was hand made by the late father of my wife about 40 years ago. We do not intend using it but would like, if possible, to see it go to a model boat enthusiast. It does float and has a battery motor inside the hull. There are one or two bits, like the starboard side light and a life belt, that need sticking back on. If you or any members of your club would like to have it, we would be glad to give it free of charge.
Anybody interested, please contact Mr. Quick directly at rogermquick@yahoo.co.uk
_________________________________________________
Posted: 08 August 2022
Cabin Cruiser
Ready to run 48 inches long 8 1/2 wide.Navigation lights and deck lights.Complete with batteries and controller.Sat in a garage in West Timperley awaiting a new skipper.Offers in the region of £100-£150Contact Andy Quick 07580 966335
_________________________________________________
Posted: 08 August 2022
Motor Torpedo Boat
Ready to run MTB36 inches long 9 inches wide.Complete with controller and batteries.Rotating radar and multiple lights.Sat in a garage in West Timperley awaiting a new skipper.Now Sold
__________________________
Posted: 08 July 2022
Update 17 November 2022
RAF Tender Rescue Launch
Length: 570 mm
Beam: 150 mm
Scale: 1:30
Metronic Brushless Motor
Lite 4 - 2.4 GHz Transmitter/Receiver
Turnigy 7.4 V 1300 mAh batteries
Excellent Condition - Room needed, hence knockdown price
£150 o.n.o
Price Reduction
Contact Philip Goddard on 0161 336 9068
_________________________________________________
Posted: 12 May 2022
Updated: 27 may 2022
Alan Breese Boat Collection
Jenny Breese, the widow of our late Commodore, wishes to sell Alan's large collection of boats, which have been in store since his death, about four years ago.
The club is acting as an intermediary to help Jenny, and anyone interested in purchasing any of these boats should, in the first instance, contact George Barrett [Exhibitions Secretary] on Geoff Garside Hon. Treasurer]. Prices are subject to negotiation with Jenny Breese, following consultation with the club.
Alan was an extremely fine modeller, and the general quality of these boats is exceptional. All are believed to be in full working order.
The boats on offer are:
Canadian Corvette - K129 - Now Sold
Sir Lancelot - T228 - Now Sold
Minesweeper - M1166 - Now Sold
Harbour Tug - Mustang - Now Sold
MTB 794
Battleship - HMS Ramilles
Aircraft Carrier
Ocean Going Tug - Cruiser - Now Sold
Unpowered Towed Barge - Now Sold
Submarine U564
Harbour Tug - Smit Polen - Now Sold
Ocean Going Tug - Yorkshireman - Now Sold
Dutch River Barge - Now Sold
_________________________________________________
Posted: 03 May 2021
Andrew Bennet
Andrew Bennett, a former member of the Club, can no longer build or sail, due to ill health, and wishes to dispose of a number of boats, in various stages of completion.
Anybody interested in any of these boats is invited to contact Andrew directly on 0161 211 5195.
Huntsman
Length: 48 inches
Prop Shaft, Servo, rudder, Deck lights and internal lights.
Hull is sound, but needs repainting and finishing.
Needs motor, ESC and radio equipment.
£50
____________________
Warship
Fibreglass Hull, 48 inches long..
Good Condition - Ready to run.
Servo operated gun turret and working radar rotator.
Deck, navigation and wheelhouse lights.
12V 7Ah battery plus 7.2 V battery for lights.
Twin motors, twin rudders and sound unit.
Receiver fitted.
Several crew figures.
7.2 V battery charger.
This Boat Has Now Been Sold
Updated 26 July 2021
_________________________________________________
Posted: 08 February 2021
Frank Ogden
Following the recent death of Frank Ogden, a long time member of the Club, his son in law, Ian Lester, wishes to dispose of his collection of boats to good homes.
This is the first. Others will follow shortly. Anybody interested should contact Ian on 0791 706 3800 with a realistic offer.
Sailing Yacht
Scratch built.
Length: 63" - 82" Over sails.
Overall Height [Fin to Masthead] : 86".
Offered complete with Planet T5 radio equipment and transmitter.
_________________________________________________
Posted: 24 January 2021
Billings Boats - Nordkap
Fishing Trawler
Scale: 1:50
Length: 810 mm
Beam: 190 mm
Height: 430 mm
Construction: Plank on Frame
This model was built many years ago by Alf Thorpe, who is now 91. He is unable to sail it now and would like it to go to a good home. It has been offered to the Club by his daughter, Christine Hughes, and a donation will be made to Club funds from the proceeds.
It is complete with original radio equipment, original kit box and manual.
If you are interested, please contact Christine Hughes at clhughes1@hotmail.co.uk, with a realistic offer, or for more information.
_________________________________________________
